-
... ///////////////////////////////////////////////////////////////////////// // ATSPeakTracker.sc // Partial tracking across frames via frequency-deviation matching // Port of peak-tracking.lisp from ATS-CUDA // Each track carries its full his ...
-
Peak: Filter: Description Class methods ar kr Inherited class methods Instance methods Inherited instance methods Examples Classes | UGens > Analysis'>Analysis > Analysis>Amplitude'>Amplitude Peak : UGen : AbstractFunction : Object Track pe ...
-
/* \peak Creates an UMap for following the highest or lowest peak from the incoming value (or UMap) value: the input value (or UMap) decay: (0-1) a decay parameter for the (low)peak detection. 0 means no decay, 1 means infinite decay direct ...
-
/* \peak Creates an UMap for following the highest or lowest peak from the incoming value (or UMap) value: the input value (or UMap) decay: (0-1) a decay parameter for the (low)peak detection. 0 means no decay, 1 means infinite decay direct ...
-
Peak track peak signal amplitude Peak.ar(in, trig) Outputs the peak amplitude of the signal received at the input. When triggered, the maximum output value is reset to the current value. in - input signal. trig - A trigger resets the output ...
-
... mel_freq_max, mel_freq_min,freq_bw_mel, freq_bands, freq_max, freq_min; var mel_peak, lin_peak, fft_peak; var freqperbin; var fftbinstart, fftbinend, fftbinmult, fftbincumul; var pos, tmp; var sr, fftsize, halffftsize; var whichbandscale,li ...
-
... eFreq = 10, dBLow = -86.0; var <server,<busses; var responder, synth, <meters, <peaks,<peaksG; var numRMSSamps, numRMSSampsRecip; *new { |server,busses| ^super.new.init(server,busses) } init { arg aserver, abusses; server = aserver ?? {Serv ...
-
... el_freq_max, mel_freq_min, freq_bw_mel, freq_bands, freq_max, freq_min; var mel_peak, lin_peak, fft_peak; var freqperbin; var fftbinstart, fftbinend, fftbinmult, fftbincumul; var pos, tmp; var sr, fftsize, halffftsize; var whichbandscale, l ...
-
... 2200.0 , res: 0.1 , lowpass: 1.0 , bandpass: 0.0 , highpass: 0.0 , notch: 0.0 , peak: 0.0 , mul: 1.0 , add: 0.0 ) SVF. kr ( signal , cutoff: 2200.0 , res: 0.1 , lowpass: 1.0 , bandpass: 0.0 , highpass: 0.0 , notch: 0.0 , peak: 0.0 , mul: 1. ...
-
... // tn: threshold on // tf: threshold off // td: threshold difference (used for Peak tracking) // maf: moving average factor // values are added with: a.addValue( 0.3 ); // create some randomlike data for testing: b = 1.0.rand; 50.do{ b = b ...