-
... first speaker in ring) vPos vertical position, default is 0 (bottom ring) level amplitude control, kr (default 1) hWidth horizontal width, max number of speakers that sound together (default 2) vWidth vertical width, max number of speakers ...
-
... = 30; x.rangeDb = 10; // higher resolution // average over the last n measured amplitudes x.avgN = 5; x.avgN = 20; x.avgN = 2; x.avgN = 1; x.avgN = 5; // change time interval x.dt = 0.03; x.dt = 0.1; x.dt = 0.3; x.dt = 1; x.dt = 0.1; // us ...
-
... or sine waves. The flags are defined as follows: 1 - normalize - Normalize peak amplitude of wave to 1.0. 2 - wavetable - If set, then the buffer is written in wavetable format so that it can be read by interpolating oscillators. 4 - clear ...
-
... : a scale value for the playback rate (can be modulated) level: playback level (amplitude of the soundfile) only the following numbers of channels are allowed: 1,2,3,4,5,6,7,8,10,12,16,24,32 -- this is an Udef definition file part of the Un ...
-
... - frequency coefficient. Default value is 0.5. range from 0.0 to 1.0 ampFrac - amplitude coefficient. Default value is 0.5. range from 0.0 to 1.0 widthFrac - bandwidth coefficient. Default value is 0.5. range from 0.0 to 1.0 v = Vowel ( \a ...
-
... n audio output on your audio interface. bus: the aux bus to send to (0-31) amp: amplitude multiplier useUChainGain: (true/false) if true the 'gain' parameter of the UChain will be used to attenuate the level, similar to "post fader send" on ...
-
... SSB)](https://en.wikipedia.org/wiki/Single-sideband_modulation) * Instantaneous Amplitude Analysis * Instantaneous Phase Analysis Installing ========== Distributed via the [SC3 Hilbert Transform Quark Library](https://gitlab.com/dxarts/ ...
-
... to the output. Returns: SSB modulated input. . arMag Analyze the instantaneous amplitude of the input. Arguments: in The input signal to analyze. mul Output will be multiplied by this value. add This value will be added to the output. Retu ...
-
... olume of this is controlled by subAmp, which is a fraction of the fundamental's amplitude. By Josh Mitchell July 2020 */ SynthDef(\fmBass, { arg //Standard Values out = 0, pan = 0, amp = 0.1, freq = 150, att = 0.0005, rel = 1, crv = -3, // ...
-
... --------------------*/ //wavetable 0: 8 lowest harmonics at equal phases and amplitudes wt0 = Signal.sineFill(384, 1/(1..8),0!8); //other options for wavetable 0, or DIY: //wt0 = Env({rrand(-1.0,1.0)}!8, {rrand(0,20)}!7, {rrand(-10, ...