-
... er send) MixerPostSend (post-fader send) Allocates an auxiliary send to route a signal from a MixerChannel to another bus, in addition to the MixerChannel's regular output. See the mixer example for a use of post-fader sends to route severa ...
-
... in the center, which is about 3dB reduction. With linear panning (LinPan2) the signal is lowered as it approaches center using a straight line from 1 (left or right) to 0.5 (center) for a 6dB reduction in the middle. A problem inherent to ...
-
... : Index : PureUGen : UGen : AbstractFunction : Object Index into a table with a signal. Source: Osc.sc See also: Index , Shaper Description The input signal value is truncated to an integer value and used as an index into the table. Out-of- ...
-
... n triggered, the maximum output value is reset to the current value. in - input signal. trig - A trigger resets the output value to the current input value. A trigger happens when the signal changes from non-positive to positive. ( { SinOsc ...
-
... n triggered, the minimum output value is reset to the current value. in - input signal. trig - A trigger resets the output value to the current input value. A trigger happens when the signal changes from non-positive to positive. ( { SinOsc ...
-
... agTimeD: 0.1 , mul: 1.0 , add: 0.0 ) From superclass: LagUD Arguments: in input signal. lagTimeU 60 dB lag time in seconds for the upgoing signal. lagTimeD 60 dB lag time in seconds for the downgoing signal. Inherited class methods Instance ...
-
... If you have problems, try increasing the number of poles (default: 0). conditionSignal Default: 0, 1 works well, choose 2 if you want exploding filters that might (?) be interesting. 0: does nothing, 1: applies a simple low pass filter to e ...
-
... or.ar(in, coef, mul, add) Integrator.kr(in, coef, mul, add) Integrates an input signal with a leak. The formula implemented is: out(0) = in(0) + (coef * out(-1)) in - input signal coef - leak coefficient. { Integrator .ar( LFPulse .ar(300, ...
-
... ecified duration, otherwise it outputs zero. trig - trigger. Trigger can be any signal. A trigger happens when the signal changes from non-positive to positive. dur - duration of the trigger output. (Default 0.1) { Trig .ar( Dust .ar(1), 0. ...
-
... . new Arguments: buffer0 Buffer created by the FFT when analysing the incoming signal. buffer1 Buffer to which PV_Control writes the alterations to be made to the magnitude of each bin. These values are scaled to be sent to MidEQ UGens, wh ...