Fork Code: SCGAZER version 1.0

name
code content
// SCgazer versiøn 1.0.
//
// Møffenzeef Mødular Stargazer Drone Synth Emulation
//
// Description:
//
// STARGAZER is øne beast øf a drøne machine: dual wavetable øscillatør
// with ninety arbitrary waveførms,
// twø resønant løwpass filters, three wavetable LFØ's,
// sample rate reductiøn, bit rate reductiøn,
// amplitude mødulatiøn, and CMØS distørtiøn.
// STARGAZER can handle the abuse it will inevitably take at gigs
// and is røad ready før whatever horrible treatment lies ahead.
// Stare intø the sky møuth agape while shredding
// parallel dimensiøns with this hypnøtic vømitrøn.
//
// Website: https://www.moffenzeefmodular.com/stargazer
//
// This is an emulatiøn from what the website is describing.
// I bet the hardware versiøn is much weirder and sø much more interesting.
// If you like it gø buy it.
//
// This is definetly nøt a spønsøred emulatiøn.
//
// 25/04/2020
// Bangkøk, Thailand
// K.E.


// Initialize randomly created waveforms

(~wt = Array.fill(90, {

	var numSegs = rrand (90, 20);
	Env(
		(({rrand(0.0, 1.0)}!(numSegs-1))*[1, -1]).scramble,
		{rrand(1, 20)}!numSegs,
		'sine'
		// {rrand(-20,20)}!numSegs
	).asSignal(1024).asWavetable;
});

~vbuf = Buffer.allocConsecutive(90, s, 2048);
~vbuf.do({
	arg buf, i;
	buf.loadCollection(~wt[i]);

});)

// Initialize the synth

(SynthDef.new(\stargazer, {

	arg amp=1, out=0, pan=0.0, freq=440, gain=(-1.0), wave=0, sub=0, detune=1,
	mix=(-1.0), freq1=880, freq2=880, res1=0.0, res2=0.0, alias=44100, redux=24,
	rate1 = 10, rate2 = 10, rate3 = 10, depth1 = 1, depth2 = 1, depth3 = 1,
	lfo1type1 = 0, 	lfo1type2 = 0, 	lfo1type3 = 0;

	var sig, detuned, pitch, lfo1, lfo2, lfo3, filter1, filter2;


	lfo1=Select.kr(lfo1type1, [LFTri.kr(rate1), LFSaw.kr(rate1), LFPulse.kr(rate1)]);
	lfo2=Select.kr(lfo1type2, [LFTri.kr(rate2), LFSaw.kr(rate2), LFPulse.kr(rate2)]);
	lfo3=Select.kr(lfo1type3, [LFTri.kr(rate3), LFSaw.kr(rate3), LFPulse.kr(rate3)]);
	detuned = Select.ar(sub, [VOsc.ar(wave, freq*detune), VOsc.ar(wave, (freq*0.5)*detune)]);

	wave = ~vbuf[0].bufnum + wave;
	sig = VOsc.ar(wave, freq);
	sig = XFade2.ar(sig, detuned, mix);
	filter1 = MoogLadder.ar(sig, freq1*lfo1.range(1, depth1), res1);
	sig = Decimator.ar(filter1, alias, redux);
	filter2 = MoogLadder.ar(sig, freq2*lfo2.range(1, depth2), res2);
	sig = Splay.ar(filter2);
	sig = LeakDC.ar(sig);
	sig = XFade2.ar(sig, sig.clip, gain);
	sig=sig*amp*lfo3.range(1, depth3);
	sig = Limiter.ar(sig, 0.8);

	Out.ar(out, sig)

}).add;)

// Example

(x=Synth(\stargazer,
	[
		\freq, 62.midicps, //Pitch
		\wave, 9, //waveform selector 0 to 89 waveform
		\detune, 1.midiratio, //detune parameter of the second oscillator
		\sub, 1, // 1 takes detune one octave lower, 0 for using detune as it is
		\mix, 0, // Mix for 2 oscillator. -1 is 1st oscillator and 1 for the 2nd oscillator only 0 is the middle
		\freq1, 800, // Cutoff frequency for the 1st filter
		\lfo1type1, 0, // LFO of 1st filter choose between 3 waveforms 0 for Triangle, 1 for Saw, 2 for Pulse
		\rate1, 10, // Rate of 1st LFO in Hz
		\depth1, 1, // Depth of 1st LFO in Hz, 1 means no modulation, 0 is max
		\alias, 44100, // Sample rate reduction in Hz
		\redux, 24, // Bit rate reduction between 0-24 bits
		\freq2, 800, // Cutoff frequency for the 2nd filter
		\lfo1type2, 0, // LFO of 2nd filter choose between 3 waveforms 0 for Triangle, 1 for Saw, 2 for Pulse
		\rate2, 10, // Rate of 2nd LFO in Hz
		\depth2, 1, // Depth of 2nd LFO in Hz, 1 means no modulation, 0 is max
		\gain, -1, // Gain stage for distortion kinda effect -1 is clean, 1 is dirty
		\lfo1type3, 0, // LFO of amplitude choose between 3 waveforms 0 for Triangle, 1 for Saw, 2 for Pulse
		\rate3, 10, // Rate of 3rd LFO in Hz
		\depth3, 1, // Depth of 3rd LFO in Hz, 1 means no modulation, 0 is max

]);)



(x.set(
	\freq, 55.midicps, //Pitch
	\wave, 69, //waveform selector 0 to 89 waveform
	\detune, 1.midiratio, //detune parameter of the second oscillator
	\sub, 1, // 1 takes detune one octave lower, 0 for using detune as it is
	\mix, 0, // Mix for 2 oscillator. -1 is 1st oscillator and 1 for the 2nd oscillator only 0 is the middle
	\freq1, 1000, // Cutoff frequency for the 1st filter
	\lfo1type1, 0, // LFO of 1st filter choose between 3 waveforms 0 for Triangle, 1 for Saw, 2 for Pulse
	\rate1, 1, // Rate of 1st LFO in Hz
	\depth1, 1, // Depth of 1st LFO in Hz, 1 means no modulation, 0 is max
	\alias, 44100/8, // Sample rate reduction in Hz
	\redux, 8, // Bit rate reduction between 0-24 bits
	\freq2, 600, // Cutoff frequency for the 2nd filter
	\lfo1type2, 0, // LFO of 2nd filter choose between 3 waveforms 0 for Triangle, 1 for Saw, 2 for Pulse
	\rate2, 60, // Rate of 2nd LFO in Hz
	\depth2, 0.3, // Depth of 2nd LFO in Hz, 1 means no modulation, 0 is max
	\gain, -1, // Gain stage for distortion kinda effect -1 is clean, 1 is dirty
	\lfo1type3, 2, // LFO of amplitude choose between 3 waveforms 0 for Triangle, 1 for Saw, 2 for Pulse
	\rate3, 20, // Rate of 3rd LFO in Hz
	\depth3, 1, // Depth of 3rd LFO in Hz, 1 means no modulation, 0 is max)
))
code description use markdown for formating
category tags comma separated, i.g. "wild, siren" (do not enter default SC class names, please)
ancestor(s) comma separated identificators, i.g. "1-C,1-1,1-4M,1-x"
Private? the code will be accessible by direct url and not visible in public activity
comment of change